The servo electric driven NIS machine is the ultimate forming solution from Bucher Emhart Glass. 

The AIS machine is recognized by the industry as the superior performer among pneumatically driven glass container forming machines.

One of the oldest and most traditional machine on the market today. The IS Machine is based on the original invention from the 1920's, and has undergone continuous development and improvement over the last 90 years.

The traditional pneumatic IS machine portfolio consists of the three machine sizes 4 1/4", 5 1/2" and 6 1/4". Each of these machines is available with different cavities and cover a wide ware range.  The IS machine range comes as a standard with Servo Electric Take Out and Servo Electric Invert mechanisms. For increased safety, IS machines are equipped with the combination of FlexIS Manual Mode and Blank side Barrier.

 The gob distributor moves the scoops with a high speed and accuracy to the entrance of the troughs in accordance with the firing order.

On the blow side, cooling leads to the stability of the container. This stability defines the production speed. The cooling capacity has to be predictable and high. It is also important to use cooling wind as efficiently as possible and not to waste energy.

The final container glass distribution is primarily set by the blank mold temperature profile and the resulting parison quality. Therefore a predictable, adjustable and stable blank mold temperature grid is vital to achieve a high container quality. The blank cooling is in fact a parison conditioning system.

Constant Cone trough angle for improved consistency in gob loading

The latest safety level for the machine operation, Manual Mode gives the operator a simple and safe method for changing mold equipment.

The Blank Side Barrier BsB is an addition to Bucher Emhart Glass container forming machines that helps to provide additional safety during the forming operation.

More than an operator interface the Blank side overhead panel is designed to provide an ergonomic operator interface to the section controls.

The pneumatically-powered lifting device is designed to give the operator support by avoiding heavy lifting when changing mold equipment.

To keep up with the evolving market demands, the number of forming-machine sections and cavities per section has grown over the last few years. This, in turn, has resulted in significant surge in the costs associated with job and mold change procedures. To expedite these procedures and reduce the workload for the operators performing these tasks, Bucher Emhart Glass offers an optional, user-friendly Blow side Lifting System.

With the introduction of new technologies to the forming machines the correct lubrication cycle time and type of oil needs more attention. The FLEXLube system provides a means of connection which retains a central location for the lubrication system and introduces a zone concept. This zone concept permits differing lubrication intervals. The dual oil unit permits the use of different oil types meeting the demands of all types of IS Machine lines.